nmos multichannel detector head c5964 series uv to near infrared range (200 to 1000 nm), for multichannel spectrophotometry www.hamamatsu.com 1 the c5964 series is a family of multichannel detectors developed for spectrophotometry in the uv to near infrared range (up to 1000 nm). the c5964 series device incorporates a thermoelectrically-cooled nmos linear image sensor (s5930/s5931/ s8382/s8383 series), low noise driver/ampli er circuit and highly stable temperature control circuit. it also operates from simple external signal inputs. the image sensor is cooled to a preset temperature (ts=0 c) as soon as the power is turned on. should the cooler fail and the device overheat, the built-in protection circuit automatically shut off the power. the housing is designed for compactness, yet offers good heart dissipation. furthermore, mounting holes are provided on the front panel of the housing, permitting easy connection to a monochromator or other instruments features applications designed for use with a thermoelectrically-cooled nmos linear image sensors (s5930 series, etc.) multichannel spectrophotometry spectrophotometer, colorimeter optical spectrum analyzer time-resolved photometry built-in driver/ampli er and temperature control circuits operates from simple signal inputs high sensitivity and wide dynamic range highly stable temperature control ensures a constant cooling temperature of ts=0 0.05 c (at ta=10 to 30 c) selection guide the c5964 series consists of the following models depending on the nmos linear image sensor used. nmos multichannel detector head nmos linear image sensor type no. number of pixels pixel size [m (h) m (v)] effective active area [mm (h) mm (v)] remark c5964-0800 s5930-256s 256 50 2500 12.8 2.5 standard type c5964-0900 s5930-512s 512 25.6 2.5 c5964-0910 s5931-512s 512 25 2500 12.8 2.5 c5964-1010 s5931-1024s 1024 25.6 2.5 c5964-0901 s8382-512s 512 50 2500 25.6 2.5 ir-enhanced type c5964-1011 s8383-1024s 1024 25 2500 25.6 2.5
nmos multichannel detector head c5964 series 2 connection example ac cable (100 to 240 v; included with the c7557-01) pc (windows 2000/xp/vista) controller for multichannel detector head c7557-01 usb cable (included with the c7557-01) c5964 series (usb 2.0) shutter * timing pulse dedicated cable (included with the c7557-01) * shutter, etc. are not available. te control i/o signal i/o power trig. kaccc0070ed precaution for use when operating the c5964 series with the c7557-01, always be sure to attach the mos adapter (supplied) to the c7557-01 main unit. if the the c5964 series is connected and the power is turned on without attaching the adapter, the power supply in the c7557-01 main unit may be damaged. absolute maximum ratings parameter symbol value unit supply voltage (for digital circuitry) +v d -0.5 to +7 v supply voltage (for analog circuitry) v a 18 v digital input voltage - v d v operating temperature topr +10 to +30 c storage temperature tstg 0 to +50 c electrical characteristics (ta=25 c, v d =+5 v, v a =15 v, unless otherwise noted) parameter symbol min. typ. max. unit digital input high level v ih +2.0 - +v d v low level v il -0.5 - +0.8 v master clock (clk) pulse frequency f clk - - 375 khz video signal readout frequency fv - - f clk /6 hz master start (start) pulse width tst 1/f clk -- s digital output high level (io=-6 ma) v ih +2.0 - - v low level (io=+6 ma) v il - - +0.8 v power supply conditions rated voltage digital +v d +4.75 +5.0 +5.25 v analog v a 14.5 15.0 15.5 v current consumption +5 vdc * 1 - - - +2.0 a +15 vdc - - - +100 ma -15 vdc - - - -100 ma * 1: including the current consumption of the p eltier element incorpor ated in the nmos linear image sensors (s5930 series, etc.)
nmos multichannel detector head c5964 series 3 electrical and optical characteristics (ta=25 c, ts=0 c, v d =+5 v, v a =15 v, unless otherwise noted) parameter built in sensor symbol min. typ. max. unit spectral response range - 200 to 1000 -n m peak sensitivity wavelength s5930/s5931 series p - 600 - nm s8382/s8383 series - 750 - saturation output charge s5930 series qsat -5 0- pc s5931 series - 25 - s8382 series - 50 - s8383 series - 25 - dark current s5930 series i d - 0.009 0.03 pa/pixel s5931 series - 0.004 0.01 s8382 series - 0.009 0.03 s8383 series - 0.004 0.01 photo response non-uniformity * 2 prnu - - 3 % conversion gain s5930 series gc - 0.2 - v/pc s5931 series - 0.4 - s8382 series - 0.2 - s8383 series - 0.4 - * 2: use f or ? a? light source. 50 % of saturation, excluding rst and last pixels. temperature controller speci t cations (ta=25 c, v d =+5 v, v a =15 v, unless otherwise noted) parameter *3 symbol min. typ. max. unit cooling temperature ts -1 0 +1 c temperature control range ? ts -0.05 - +0.05 c power dissipation of peltier element pp - - 7 w cool down time to preset temperature to - - 5 min setting temperature for overheart protection to +40 - - c * 3: other functions include error display, automatic power off, and detection of electrical opens and shorts by the thermosensor . spectral response (measurement example) wavelength (nm) (ta=25 c) photo sensitivity (a/w) 600500 300 400 200 0 0.1 0.2 0.5 0.4 0.3 700 800 900 1100 1000 1200 standard types ir-enhanced types kmpdb0159ea
nmos multichannel detector head c5964 series 4 vss start ?st clock clock ?1 ?2 active photodiode saturation control gate saturation control drain dummy diodes dummy video active video end of scan digital shift register (mos shift register) equivalent circuit (nmos linear image sensor s5930/s5931/s8382/s8383 series) kmpdc0020ea led th.h * 2 p+ p- th.c * 1 temperature contoroller buffer controller +5 v, vdd(d) +15 v -15 v +5 v d.gnd +15 v a. gnd -15 v clk start trigger eos +5 v themoelectric cooler start clk1 clk2 end vdd(d) gnd(d) gnd(a) video nmos linear image sensor s5930 series, etc. timing signal +15 v +15 v burrer lowpass filter data video gain amplifier integration amplifier * 1: thermistor incorporated in the image sensor (for temperature monitoring of the image sensor) * 2: thermistor mounted on the heatsink fins (for temperature monitoring of the heat radiating side) block diagram (c5964 series) kaccc0067ea
nmos multichannel detector head c5964 series 5 115 focal length 7.0 0.5 (4 ) m3 depth 9 80.0 94.0 40.0 49.0 dimensional outline (unit: mm) kacca0053ea st clk2/clamp data video eos trigger clk1/reset clk2 reset start clk timing chart kaccc0068ea
nmos multichannel detector head c5964 series 6 kaccc0069ea pin connection 15-pin d-sub connector (socket type) 1 2345678 9 101112 131415 precautions for use the c5964 series is a precision device, so use suf cient caution when handling it. never disassemble or modify the device as this may cause an operating failure. protect the device from shocks such as drops or impacts. avoid storing the device in high temperature and high humidity locations for long periods of time. never block the air vents provided on the top and side panels of this unit during operation. blocking the air vents may cause overheating. when connecting to other equipment, check that the electrical speci cations are matched. never exceed the maximum ratings during operation. observe the following precautions to obtain the fullest performance of device. provide a proper shield to protect the device against external electromagnetic effects. use of a shield cable is recommended. use a power supply with minimum ripple and noise. pay attention to prevent extraneous light from entering the device for accurate measurements. pin no. symbol description 1 nc no connection 2 data video analog video output signal. positive polarity 3 v a1+ (+15 v) power supply for analog circuitry 4 v a1- (-15 v) power supply for analog circuitry 5 v d (+5 v, p+) power supply for digital circuitry. for the thermoelectric cooler in the nmos linear image sensor 6 start digital input signal to initialize the circuit hcmos compatible. positive logic the start pulse interval determines the signal storage time of the sensor. 7 clk digital input signal to specify the circuit operation hcmos compatible. operates at the rising edge 8 eos digital output signal to indicate the end of scan of the nmos linear image sensor hcmos compatible. negative logic 9 a.gnd analog ground 10 a.gnd analog ground 11 nc no connection 12 d.gnd(p-) digital ground. power supply return of the thermoelectric cooler mounted in the nmos linear image sensor 13 d.gnd digital ground 14 d.gnd digital ground 15 trigger digital output signal for a/d conversion hcmos compatible. positive logic
nmos multichannel detector head c5964 series cat. no. kacc1018e06 jul. 2014 dn www.hamamatsu.com hamamatsu photonics k.k., solid state division 1126-1 ichino-cho, higashi-ku, hamamatsu city, 435-8558 japan, telephone: (81) 53-434-3311, fax: (81) 53-434-5184 u.s.a.: hamamatsu corporation: 360 foothill road, bridgewater, n.j. 08807, u.s.a., telephone: (1) 908-231-0960, fax: (1) 908-23 1-1218 germany: hamamatsu photonics deutschland gmbh: arzbergerstr. 10, d-82211 herrsching am ammersee, germany, telephone: (49) 8152-375-0, fax: (49) 8152-265-8 france: hamamatsu photonics france s.a.r.l.: 19, rue du saule trapu, parc du moulin de massy, 91882 massy cedex, france, telephone: 33-(1) 69 53 71 00, fax: 33-(1) 69 53 71 10 united kingdom: hamamatsu photonics uk limited: 2 howard court, 10 tewin road, welwyn garden city, hertfordshire al7 1bw, united kingdom, telephone: (44) 1707-294888, fax: (44) 1707-325777 north europe: hamamatsu photonics norden ab: torshamnsgatan 35 16440 kista, sweden, telephone: (46) 8-509-031-00, fax: (46) 8-5 09-031-01 italy: hamamatsu photonics italia s.r.l.: strada della moia, 1 int. 6, 20020 arese (milano), italy, telephone: (39) 02-93581733 , fax: (39) 02-93581741 china: hamamatsu photonics (china) co., ltd.: b1201, jiaming center, no.27 dongsanhuan beilu, chaoyang district, beijing 100020 , china, telephone: (86) 10-6586-6006, fax: (86) 10-6586-2866 product specifications are subject to change without prior notice due to improvements or other reasons. this document has been carefully prepared and the information contained is believed to be accurate. in rare cases, however, there may be inaccuracies such as text errors. before using these products, always contact us for the delivery specification sheet to check the latest specifications. t ype numbers of products listed in the delivery specification sheets or supplied as samples may have a suffix "(x)" which means preliminary specifications or a suffix "(z)" which means developmental specifications. t he product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovered and reported to us within that one year period. however, even if within the warranty period we accept absolutely no liability for any loss caused by natural d isasters or improper product use. copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission. information described in this material is current as of july, 2014. 7
|
